| BORE CENTER TO SHANK END DISTANCE | 1.3800 INCHES MINIMUM AND 1.4000 INCHES MAXIMUM |
| BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM |
| HARDNESS RATING | 37.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM ROD END BODY |
| INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY |
| OVERALL LENGTH | 1.7550 INCHES MINIMUM AND 1.7750 INCHES MAXIMUM |
| MATERIAL | PLASTIC TETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 303 OR STEEL COMP 304 RACE INSERT |
| MATERIAL | STEEL COMP 4130 ROD END BODY |
| MATERIAL | STEEL COMP E52100 INNER MEMBER |
| OUTER MEMBER OUTSIDE DIAMETER | 0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3230 INCHES MINIMUM AND 0.3330 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.8440 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 4900 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| TEST DATA DOCUMENT | 81996-AVRE66 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.438 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 20 |