| MATERIAL | STEEL COMP 440C INNER MEMBER |
| STEEL COMP 410 RACE INSERT |
| PLASTIC TETRAFLUOROETHYLENE RACE LINER |
| STEEL COMP 4130 ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| 66 FED STD SINGLE MATERIAL RESPONSE RACE INSERT |
| 66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY |
| SURFACE TREATMENT | CADMIUM OR |
| CHROMATE OR |
| CADMIUM AND |
| PHOSPHATE ROD END BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC ALL TREATMENT RESPONSES ROD END BODY |
| STYLE DESIGNATOR | BALL TYPE |
| OVERALL LENGTH | 3.0790 INCHES MINIMUM AND |
| 3.1215 INCHES MAXIMUM |
| BORE DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 1.3020 INCHES MINIMUM AND |
| 1.3470 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 2.4280 INCHES MINIMUM AND |
| 2.4480 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.5100 INCHES MINIMUM AND |
| 0.5200 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.6200 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 16900 POUNDS |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.4700 INCHES MINIMUM AND |
| 1.5600 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| SPECIAL FEATURES | 9 DEG SELFALIGNMENT IN EITHER DIRECTION |
| TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND |
| 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 77272 |
| MFR SOURCE CONTROLLING REFERENCE | 114CS112-4 |