| MATERIAL | ALUMINUM ALLOY OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-266 FED SPEC SINGLE MATERIAL RESPONSE OR |
| QQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END |
| OVERALL LENGTH | 1.1200 INCHES MINIMUM AND |
| 1.1400 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 1.3400 INCHES MINIMUM AND |
| 1.3600 INCHES MAXIMUM |
| BODY INSIDE DIAMETER | 1.2510 INCHES MINIMUM AND |
| 1.2520 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 1.4900 INCHES MINIMUM AND |
| 1.5100 INCHES MAXIMUM |
| FLANGE WIDTH | 0.2400 INCHES MINIMUM AND |
| 0.2600 INCHES MAXIMUM |
| CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| SQUARE OUTSIDE RIGHT CORNER |
| CHAMFERED INSIDE RIGHT CORNER |
| SQUARE INSIDE LEFT CORNER |
| SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
| ROUND LEFT FLANGE BODY CORNER |
| ANTIROTATION/LUBRICATION TYPE AND QUANTITY | 1 HOLE AND |
| 1 SLOT |
| HOLE DIAMETER | 0.0781 INCHES NOMINAL FIRST |
| SLOT WIDTH | 0.2400 INCHES MINIMUM AND |
| 0.2600 INCHES MAXIMUM FIRST |
| SLOT LENGTH | 0.3900 INCHES MINIMUM AND |
| 0.4100 INCHES MAXIMUM FIRST |
| SURFACE FINISH | 32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY |
| 125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE |
| 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
| 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE |
| 125.0 MICROINCHES RIGHT END SURFACE OF BODY |
| 125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
| LUBRICANT ACCOMMODATION STYLE | GROOVED CIRCULAR |
| SURFACE GROOVE LOCATION AND QUANTITY | 1 EXTERNAL |
| SPECIAL FEATURES | GROOVE LOCATED ON FLANGE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 77272 |
| DESIGN CONTROL REFERENCE | 114L1320-1 |