|
|
|
National Stock Number:
3120-00-947-0100
Federal Supply Class:
3120
National Item Identification Number:
009470100
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 123HM40089-1 | 0BVP9 | CAPY MACHINE SHOP INC. | | 123HM40089-1 | 0R2T5 | DESIGN/OL, INC. | | 123HM40089-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123HM40089-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BORE DIAMETER | 0.5620 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM | | BORE CENTER TO SHANK END DISTANCE | 2.8120 INCHES NOMINAL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY | | HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OUTER RACE MEMBER | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER | | INNER MEMBER WIDTH | 0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM | | OVERALL LENGTH | 3.5620 INCHES NOMINAL | | MATERIAL | PLASTIC RACE LINER | | MATERIAL | STEEL COMP 440C INNER MEMBER | | MATERIAL | STEEL COMP 410 OUTER RACE MEMBER | | MATERIAL | STEEL COMP E4340 ROD END BODY | | OUTER MEMBER OUTSIDE DIAMETER | 1.5000 INCHES NOMINAL | | OUTER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4470 INCHES MAXIMUM | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.7810 INCHES NOMINAL | | SPECIAL FEATURES | ENTIRE THD LG SLOTTED LONGITUDINALLY 0.1250 INMIN,0.1300 IN MAX W BY 0.0840 IN MIN,0.0890 IN MAX DEEP | | STATIC RADIAL LOAD RATING | 24550 POUNDS | | STYLE DESIGNATOR | BALL TYPE | | SURFACE TREATMENT | CADMIUM ROD END BODY | | SURFACE TREATMENT | CHROMIUM INNER MEMBER | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.625 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 18 |
|
|