|
|
|
National Stock Number:
3120-00-947-4215
Federal Supply Class:
3120
National Item Identification Number:
009474215
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 123HM40040-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123HM40040-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BORE CENTER TO SHANK END DISTANCE | 2.1250 INCHES NOMINAL | | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | INNER MEMBER WIDTH | 0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM | | OVERALL LENGTH | 2.6250 INCHES NOMINAL | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER | | MATERIAL | STEEL CORROSION RESISTING INNER MEMBER | | MATERIAL | STEEL CORROSION RESISTING OUTER RACE MEMBER | | MATERIAL | STEEL ROD END BODY | | OUTER MEMBER OUTSIDE DIAMETER | 1.0000 INCHES NOMINAL | | OUTER MEMBER WIDTH | 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.3590 INCHES MINIMUM AND 1.3900 INCHES MAXIMUM | | SPECIAL FEATURES | ENTIRE THD LG SLOTTEDLONGITUDINALLY 0.0930 IN MIN,0.0980 IN MAX W BY 0.0618IN MIN,0.0640 IN MAX DEEP | | STATIC RADIAL LOAD RATING | 7650 POUNDS | | STYLE DESIGNATOR | BALL TYPE | | SURFACE TREATMENT | CADMIUM ROD END BODY | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.375 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 24 |
|
|