|
|
|
National Stock Number:
3120-00-950-9494
Federal Supply Class:
3120
National Item Identification Number:
009509494
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 128HM10039-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 128HM10039-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BORE DIAMETER | 0.5620 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM | | BORE CENTER TO SHANK END DISTANCE | 2.5620 INCHES NOMINAL | | FEATURES PROVIDED | FLUSH LUBRICATION FITTING | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY | | INNER MEMBER WIDTH | 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM | | LUBRICATION FEATURE | GROOVE INTERNAL OUTER MEMBER | | LUBRICATION FEATURE | GROOVE EXTERNAL OUTER MEMBER | | LUBRICATION FEATURE | GROOVE INTERNAL INNER MEMBER | | LUBRICATION FEATURE | PERFORATION INTERNAL SURFACES | | LUBRICATION FEATURE | PERFORATION EXTERNAL SURFACE MEMBER | | OVERALL LENGTH | 3.2490 INCHES NOMINAL | | MATERIAL | COPPER ALLOY RACE INSERT | | MATERIAL | STEEL COMP E4340 ROD END BODY | | MATERIAL | STEEL COMP E52100 INNER MEMBER | | OUTER MEMBER OUTSIDE DIAMETER | 1.3740 INCHES NOMINAL | | OUTER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.6560 INCHES NOMINAL | | SPECIAL FEATURES | ENTIRE THD SLOTTED LONGITUDINALLY 0.1250 IN. MIN,0.1300 IN.MAX BY 0.0840 IN. MIN 0.0890IN. MAX DEEP | | STYLE DESIGNATOR | BALL TYPE | | SURFACE TREATMENT | CADMIUM ROD END BODY | | SURFACE TREATMENT | CHROMIUM INNER MEMBER | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.562 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 18 |
|
|