| BORE DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 4.3400 INCHES MINIMUM AND 4.4000 INCHES MAXIMUM |
| HARDNESS RATING | 56.0 ROCKWELL C NOMINAL INNER MEMBER |
| HARDNESS RATING | 30.0 ROCKWELL C NOMINAL ROD END BODY |
| INNER MEMBER WIDTH | 1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 209-010-443,97499 MFR REF SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 209-010-443,97499 MFR REF SINGLE MATERIAL RESPONSE RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | 209-010-443,97499 MFR REF SINGLE MATERIAL RESPONSE RACE LINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 209-010-443,97499 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY |
| OVERALL LENGTH | 5.6475 INCHES MINIMUM AND 5.7300 INCHES MAXIMUM |
| MATERIAL | PLASTIC TETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL INNER MEMBER |
| MATERIAL | STEEL RACE INSERT |
| MATERIAL | STEEL ROD END BODY |
| OUTER MEMBER OUTSIDE DIAMETER | 2.6150 INCHES MINIMUM AND 2.6600 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 1.0000 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM |
| SHANK THREAD LENGTH | 2.3400 INCHES MINIMUM AND 2.4000 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SPECIAL FEATURES | HOLE DRILLED THROUGH SHANK AXIS 0.3020 IN. MIN,0.3220 IN. MAX DIA 2.2800 IN. MIN,2.3404 IN. MAX DEEP |
| TEST DATA DOCUMENT | 97499-BPS-FW-4089 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.750 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 16 |
| THREAD SERIES DESIGNATOR | UNJF |