|
|
|
National Stock Number:
3120-00-983-0332
Federal Supply Class:
3120
National Item Identification Number:
009830332
Description:
BEARING,SLEEVE
Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.
|
Manufacturer Information:
| 1364-9 | 13002 | GOODRICH CORPORATION | | 1364-9 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 4.2500 INCHES MINIMUM AND 4.2520 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 4.9940 INCHES MINIMUM AND 4.9970 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | OVERALL LENGTH | 2.8500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 954 OVERALL | | STYLE DESIGNATOR | SOLID, PLAIN, NO OUTSIDE FLANGES | | SURFACE FINISH | 125.0 MICROINCHES LEFT END SURFACE OF BODY | | SURFACE FINISH | 125.0 MICROINCHES RIGHT END SURFACE OF BODY | | SURFACE FINISH | 63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|