3110-01-024-1908 RETAINER,BALL,BEARING Index 3120-01-024-1910 BEARING,SLEEVE

National Stock Number:
3120-01-024-1909

Federal Supply Class:
3120

National Item Identification Number:
010241909

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
3022565-00110001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
3022565-00153711NAVAL SEA SYSTEMS COMMAND


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY3 HOLE
BODY INSIDE DIAMETER0.6875 INCHES MINIMUM AND 0.6880 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.2470 INCHES MINIMUM AND 1.2490 INCHES MAXIMUM
CORNER SHAPECHAMFERED INSIDE LEFT CORNER
CORNER SHAPECHAMFERED INSIDE RIGHT CORNER
CORNER SHAPERELIEF GROOVE LEFT FLANGE BODY CORNER
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER2.2200 INCHES MINIMUM AND 2.2800 INCHES MAXIMUM
FLANGE WIDTH0.2500 INCHES NOMINAL
HOLE DIAMETER0.2490 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM FIRST
OVERALL LENGTH0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-750,COMP A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY 510 OVERALL
MATERIALGREASE LUBRICATION
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us