3120-01-024-7611 BUSHING,SLEEVE Index 5307-01-024-7614 STUD,CONTINUOUS THREAD

National Stock Number:
3120-01-024-7612

Federal Supply Class:
3120

National Item Identification Number:
010247612

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
40643562983EATON AEROSPACE, LLC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CORNER SHAPESQUARE FOURTH OUTSIDE CORNER
CORNER SHAPESQUARE SECOND INSIDE CORNER
CORNER SHAPESQUARE SECOND OUTSIDE CORNER
CORNER SHAPESQUARE THIRD OUTSIDE CORNER
CORNER SHAPESQUARE FIRST INSIDE CORNER
CORNER SHAPESQUARE FIRST OUTSIDE CORNER
CROSS-SECTIONAL SHAPE STYLESHOULDERED
DIAMETER0.2100 INCHES MINIMUM AND 0.2150 INCHES MAXIMUM
FLANGE THICKNESS0.0230 INCHES MINIMUM AND 0.0270 INCHES MAXIMUM
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
KEY LENGTH0.0110 INCHES NOMINAL
KEY QUANTITY1
KEY RADIUS0.0350 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER0.4300 INCHES MINIMUM AND 0.4360 INCHES MAXIMUM
OVERALL THICKNESS0.0500 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM
SHANK OUTSIDE DIAMETER0.2500 INCHES MINIMUM AND 0.2540 INCHES MAXIMUM
STYLE DESIGNATORROUND W/ROUND KEYS
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LARGEST OUTSIDE DIAMETER
SURFACE FINISH125.0 MICROINCHES RIGHT SIDE
SURFACE FINISH125.0 MICROINCHES RIGHT SIDE OF FLANGE
SURFACE FINISH125.0 MICROINCHES SMALLEST OUTSIDE DIAMETER
SURFACE FINISH16.0 MICROINCHES LEFT SIDE


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us