| BORE CENTER TO SHANK END DISTANCE | 1.4590 INCHES MINIMUM AND 1.4790 INCHES MAXIMUM |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM |
| FEATURES PROVIDED | EXTERNAL LUBRICATION FITTING |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM RACE INSERT |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM ROD END BODY |
| HARDNESS RATING | 57.0 ROCKWELL C MINIMUM AND 61.0 ROCKWELL C MAXIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.3750 INCHES NOMINAL |
| LUBRICATION FEATURE | PERFORATION RACE INSERT |
| OVERALL LENGTH | 1.8445 INCHES MINIMUM AND 1.8745 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION |
| MATERIAL | GREASE LUBRICATION |
| MATERIAL | STEEL COMP 347 OR STEEL COMP 303 RACE INSERT |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 4340 ROD END BODY |
| MATERIAL | STEEL COMP E52100 OR STEEL COMP 440C INNER MEMBER |
| OUTER MEMBER OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3320 INCHES MINIMUM AND 0.3470 INCHES MAXIMUM |
| SHANK STYLE | INTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 0.7190 INCHES MINIMUM AND 0.8120 INCHES MAXIMUM |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.5000 INCHES NOMINAL |
| SPECIAL FEATURES | PLATING ON COMP E52100 INNER MEMBER ONLY |
| STATIC RADIAL LOAD RATING | 5500 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3B |
| THREAD DIAMETER | 0.312 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 24 |