3120-01-087-4322, BUSHING,SLEEVE

National Stock Number:
3120-01-087-4322

Federal Supply Class:
3120

National Item Identification Number:
010874322

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

206-011-128-1

97499

BELL TEXTRON INC

Techincal Specification:

MATERIAL	STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	97499206-011-128-1 MFR REF ALL MATERIAL RESPONSES OVERALL
HARDNESS RATING	40.0 ROCKWELL C MINIMUM AND
	45.0 ROCKWELL C MAXIMUM INNER LAYER
SURFACE TREATMENT	PASSIVATE RIGHT END SURFACE OF FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	BPSFW4007,97499 MFR REF ALL TREATMENT RESPONSES OVERALL
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH	0.3750 INCHES MINIMUM AND
	0.3900 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.3680 INCHES MINIMUM AND
	0.3700 INCHES MAXIMUM
BODY INSIDE DIAMETER	0.2490 INCHES MINIMUM AND
	0.2510 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER	0.6400 INCHES MINIMUM AND
	0.6600 INCHES MAXIMUM
FLANGE WIDTH	0.0760 INCHES MINIMUM AND
	0.0920 INCHES MAXIMUM
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
	SQUARE OUTSIDE RIGHT CORNER
	SQUARE INSIDE RIGHT CORNER
	SQUARE INSIDE LEFT CORNER
	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
	RELIEF GROOVE LEFT FLANGE BODY CORNER
TEST DATA DOCUMENT	97499-BPS FW 4089 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THE MANUFACTURERS DATA
MANUFACTURERS CODE	97499
DESIGN CONTROL REFERENCE	206-011-128-1

Click here to Register for Free 30-day Trial