3110-01-126-7591 SEAT,BEARING Index 3120-01-126-7593 BUSHING,SLEEVE

National Stock Number:
3120-01-126-7592

Federal Supply Class:
3120

National Item Identification Number:
011267592

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
3611024235WILLIAMS INTERNATIONAL CO., L.L.C.


Techincal Specification:
BODY INSIDE DIAMETER0.9530 INCHES MINIMUM AND 0.9550 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.0540 INCHES MINIMUM AND 1.0544 INCHES MAXIMUM
CORNER SHAPEROUND CENTER FLANGE LEFT BODY CORNER
CORNER SHAPEROUND CENTER FLANGE RIGHT BODY CORNER
CORNER SHAPESQUARE CENTER FLANGE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE CENTER FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
END TO FLANGE DISTANCE0.4820 INCHES MINIMUM AND 0.4880 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER1.2330 INCHES MINIMUM AND 1.2370 INCHES MAXIMUM
FLANGE WIDTH0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM
HARDNESS RATING60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
LEFT END BODY DIAMETER1.1320 INCHES MINIMUM AND 1.1350 INCHES MAXIMUM
OVERALL LENGTH2.0230 INCHES MINIMUM AND 2.0270 INCHES MAXIMUM
MATERIALSTEEL COMP M50 OVERALL
RIGHT END BODY DIAMETER1.0540 INCHES MINIMUM AND 1.0544 INCHES MAXIMUM
SPECIAL FEATURESUSED ON H.P. TURBINE,REAR
STYLE DESIGNATORSOLID, EXTERNAL FLANGE


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us