|
|
|
National Stock Number:
3120-01-131-5530
Federal Supply Class:
3120
National Item Identification Number:
011315530
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| 10107952 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 74A731027- 2001 | 0PXV4 | THE BOEING COMPANY | | 74A731027- 2001 | 1KLH9 | MVO USA, INC. | | 74A731027-2001 | 76301 | THE BOEING COMPANY | | 74A731027-2001 | 8V613 | THE BOEING COMPANY |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 0.6860 INCHES MINIMUM AND 0.6880 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.8730 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | SUPP | | OVERALL LENGTH | 1.6500 INCHES MINIMUM AND 1.7100 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BUSHING, SLEEVE - PRELOAD POST | | SPECIAL FEATURES | 8 NOTCHES EQUALLY SPACED WITHIN 1 DEG END OPPOSITE EXTERNAL GROOVE | | SPECIAL TEST FEATURES | FINISH SPECIFICATION: 74A901001 | | SUPPLEMENTARY FEATURES | CRITICAL SAFETY ITEM (CSI) | | TEST DATA DOCUMENT | 76301-PS21202,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|