|
|
|
National Stock Number:
3120-01-132-2239
Federal Supply Class:
3120
National Item Identification Number:
011322239
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 5005416 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DIAMETER | 0.5920 INCHES MINIMUM AND 0.5925 INCHES MAXIMUM | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 1.1244 INCHES MINIMUM AND 1.1249 INCHES MAXIMUM | | OVERALL THICKNESS | 0.3270 INCHES MINIMUM AND 0.3290 INCHES MAXIMUM | | SPECIAL FEATURES | BORE COUNTERBORED ON BOTH ENDS 0.6350 IN. MIN,0.6400 IN. MAX DIA; 0.0250 IN. MIN,0.0350 IN. MAX DP |
|
|