| BORE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 3.0000 INCHES NOMINAL |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.4400 INCHES NOMINAL |
| OUTER MEMBER OUTSIDE DIAMETER | 1.1200 INCHES NOMINAL |
| OUTER MEMBER WIDTH | 0.3120 INCHES MINIMUM AND 0.3220 INCHES MAXIMUM |
| OVERALL LENGTH | 3.5600 INCHES NOMINAL |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 440C OR STEEL COMP XM-13 INNER MEMBER |
| MATERIAL | STEEL COMP 630 RACE INSERT |
| MATERIAL | STEEL COMP XM-12 ROD END BODY |
| SHANK STYLE | INTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 1.3000 INCHES NOMINAL |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.5530 INCHES MINIMUM AND 0.5630 INCHES MAXIMUM |
| SPECIAL FEATURES | FOUR EQUALLY SPACED SLOTS FOR LOCKING WASHER IN END OF SHANK; W/O BEAD ON SHANK |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT | PASSIVATE ROD END BODY |
| TEST DATA DOCUMENT | 76301-PS21201 CLASS B SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3B |
| THREAD DIAMETER | 0.375 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 24 |