|
|
|
National Stock Number:
3120-01-143-2795
Federal Supply Class:
3120
National Item Identification Number:
011432795
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 31-P-61 | 11757 | PARKER HANNIFIN CORPORATION | | 802CX383 | 45152 | OSHKOSH CORP | | 802CX383 | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 1.5320 INCHES MINIMUM AND | | 1.5520 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.0300 INCHES MINIMUM AND | | 0.0320 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 1.0020 INCHES MINIMUM AND | | 1.0120 INCHES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES LEFT SIDE | | 16.0 MICROINCHES RIGHT SIDE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 75Q65 | | DESIGN CONTROL REFERENCE | 802CX383 |
|
|