3120-01-153-7545 BEARING,SLEEVE Index 5365-01-153-7549 SPACER,SLEEVE

National Stock Number:
3120-01-153-7546

Federal Supply Class:
3120

National Item Identification Number:
011537546

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
AS81934/10U583SAE INTERNATIONAL
AS81934/181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
M81934/1-18C0360U583SAE INTERNATIONAL
M81934/1-18C03681343SOCIETY OF AUTOMOTIVE ENGINEERS INC
M81934/1-18C03681349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21240-18C03696906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SAE AS81934/10U583SAE INTERNATIONAL
SAE-AS81934/10U583SAE INTERNATIONAL
SAE-AS81934/181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
SAE-AS81934/1-18C03681343SOCIETY OF AUTOMOTIVE ENGINEERS INC
SAE AS81934/181343SOCIETY OF AUTOMOTIVE ENGINEERS INC


Techincal Specification:
BODY INSIDE DIAMETER1.1255 INCHES MINIMUM AND 1.1265 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.3143 INCHES MINIMUM AND 1.3148 INCHES MAXIMUM
CORNER SHAPESQUARE ALL CORNERS
OVERALL LENGTH1.1150 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5643,COND H-1150 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
MATERIALSTEEL COMP 630 OUTER LAYER
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 TYPE 1 OR 2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OUTER LAYER
SURFACE TREATMENTANODIZE OR CHROMATE OUTER LAYER


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us