|
|
|
National Stock Number:
3120-01-160-2223
Federal Supply Class:
3120
National Item Identification Number:
011602223
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 18850 | 71041 | ALTRA INDUSTRIAL MOTION CORP. | | 425 | 62920 | TRANSACT INTL INC | | MS17811 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS17811-13 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1020 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 1.4950 INCHES MINIMUM AND | | 1.5050 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.1850 INCHES MINIMUM AND | | 0.1890 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 0.6270 INCHES MINIMUM AND | | 0.6320 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY | | 125.0 MICROINCHES LARGEST OUTSIDE DIAMETER | | 32.0 MICROINCHES LEFT SIDE | | 32.0 MICROINCHES RIGHT SIDE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS17811 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS17811-13 |
|
|