3120-01-168-4275 BEARING,PLAIN,SPHERICAL Index 4820-01-168-4277 VALVE,BUTTERFLY

National Stock Number:
3120-01-168-4276

Federal Supply Class:
3120

National Item Identification Number:
011684276

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
7653109-1198747OGDEN AIR LOGISTICS CENTER


Techincal Specification:
MATERIALALUMINUM ALLOY 2014 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/2 FED SPEC SINGLE MATERIAL RESPONSE OR
QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTANODIZE INSIDE DIAMETER SURFACE OF BODY
ANODIZE LEFT END SURFACE OF BODY AND FLANGE
ANODIZE OUTSIDE DIAMETER SURFACE OF BODY
COPPER ALLOY OUTSIDE DIAMETER SURFACE OF FLANGE
ANODIZE RIGHT END SURFACE OF BODY
ANODIZE RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY
MIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE
MIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
MIL-W-6712,TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
MIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE RIGHT END SURFACE OF BODY
MIL-A-8625,TYPE2,CLASS1 MIL SPEC 2ND TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE ONE END
OVERALL LENGTH5.5900 INCHES NOMINAL
BODY OUTSIDE DIAMETER10.0600 INCHES NOMINAL
BODY INSIDE DIAMETER9.5600 INCHES NOMINAL
FLANGE OUTSIDE DIAMETER10.1380 INCHES MINIMUM AND
10.1430 INCHES MAXIMUM
FLANGE WIDTH3.9600 INCHES NOMINAL
LEFT INTERNAL FLANGE HOLE DIAMETER9.0620 INCHES MINIMUM AND
9.0650 INCHES MAXIMUM
LEFT INTERNAL FLANGE WIDTH3.9000 INCHES NOMINAL
CORNER SHAPECHAMFERED OUTSIDE LEFT CORNER
ROUND OUTSIDE RIGHT CORNER
SQUARE INSIDE RIGHT CORNER
CHAMFERED INSIDE LEFT CORNER
SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
ROUND LEFT FLANGE BODY CORNER
ANTIROTATION/LUBRICATION TYPE AND QUANTITY2 HOLE
HOLE DIAMETER0.37475 INCHES MINIMUM AND
0.62750 INCHES MAXIMUM FIRST
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
125.0 MICROINCHES RIGHT END SURFACE OF BODY
125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
LUBRICANT ACCOMMODATION STYLEGROOVED OPEN ONE END
SURFACE GROOVE LOCATION AND QUANTITY6 INTERNAL
THE MANUFACTURERS DATA
MANUFACTURERS CODE98747
DESIGN CONTROL REFERENCE7653109-11


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us