| MATERIAL | STEEL COMP E52100 INNER MEMBER |
| COPPER ALLOY 485 RACE INSERT |
| PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| STEEL ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| QQ-B-637 FED SPEC SINGLE MATERIAL RESPONSE RACE INSERT |
| UNIFLON,UFL-3,FSCM 73134 MFR REF SINGLE MATERIAL RESPONSE RACE LINER |
| ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
| HARDNESS RATING | 60.0 ROCKWELL C MINIMUM INNER MEMBER |
| SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| CADMIUM ROD END BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| STYLE DESIGNATOR | BALL TYPE |
| OVERALL LENGTH | 1.6870 INCHES NOMINAL |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2515 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.7400 INCHES MINIMUM AND |
| 0.7600 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.3020 INCHES MINIMUM AND |
| 1.3220 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.2760 INCHES MINIMUM AND |
| 0.2860 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.3700 INCHES MINIMUM AND |
| 0.3750 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 1550 POUNDS |
| SHANK STYLE | INTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 0.7500 INCHES MINIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.3070 INCHES MINIMUM AND |
| 0.3170 INCHES MAXIMUM |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.4580 INCHES MINIMUM AND |
| 0.4780 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD DIAMETER | 0.250 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| SPECIAL FEATURES | PLATING OPTIONAL ON SIDES OF INNER MEMBER,NO PLATING IN BORE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 73134 |
| DESIGN CONTROL REFERENCE | HFR-4SAC |