5905-01-186-4033 RESISTOR,FIXED,WIRE WOUND,INDUCT Index 5360-01-186-4035 SPRING,HELICAL,COMPRESSION

National Stock Number:
3120-01-186-4034

Federal Supply Class:
3120

National Item Identification Number:
011864034

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
803-5001048 PIECE 12453711NAVAL SEA SYSTEMS COMMAND
803-5001048 PIECE 12457041SPECO INC
AS819340U583SAE INTERNATIONAL
AS81934/20U583SAE INTERNATIONAL
AS81934/281343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AS8193481343SOCIETY OF AUTOMOTIVE ENGINEERS INC
M81934/2-08C0160U583SAE INTERNATIONAL
M81934/2-08C01681343SOCIETY OF AUTOMOTIVE ENGINEERS INC
SAE AS81934/281343SOCIETY OF AUTOMOTIVE ENGINEERS INC
M81934/2-08C01681349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-B-81934/281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
STEEL COMP 630 OUTER LAYER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH0.5475 INCHES MINIMUM AND
0.5625 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.6260 INCHES MINIMUM AND
0.6265 INCHES MAXIMUM
BODY INSIDE DIAMETER0.5005 INCHES MINIMUM AND
0.5015 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER0.9800 INCHES MINIMUM AND
1.0000 INCHES MAXIMUM
FLANGE WIDTH0.0575 INCHES MINIMUM AND
0.0625 INCHES MAXIMUM
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
SQUARE OUTSIDE RIGHT CORNER
SQUARE INSIDE RIGHT CORNER
SQUARE INSIDE LEFT CORNER
SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
UNDERCUT LEFT FLANGE BODY CORNER
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
125.0 MICROINCHES RIGHT END SURFACE OF BODY
125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SPECIAL FEATURESPLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us