|
|
|
National Stock Number:
3120-01-190-2255
Federal Supply Class:
3120
National Item Identification Number:
011902255
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| SUM3597 | 058R3 | GE AVIATION SYSTEMS LLC | | SUM3597 | 35012 | GE AVIATION SYSTEMS LLC | | SUM3597 | K5294 | GE AVIATION SYSTEMS LIMITED |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | BS 970 325S21,FSCM K5294 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 0722-568,FSCM K5294 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 0.4000 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.2860 INCHES NOMINAL | | FLANGE OUTSIDE DIAMETER | 1.8600 INCHES NOMINAL | | FLANGE WIDTH | 0.0600 INCHES NOMINAL | | END TO FLANGE DISTANCE | 0.0400 INCHES NOMINAL | | LEFT END BODY DIAMETER | 0.6250 INCHES NOMINAL | | RIGHT END BODY DIAMETER | 0.5012 INCHES MINIMUM AND | | 0.5016 INCHES MAXIMUM | | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER | | SQUARE OUTSIDE RIGHT CORNER | | SQUARE INSIDE RIGHT CORNER | | SQUARE INSIDE LEFT CORNER | | SQUARE CENTER FLANGE LEFT BODY CORNER | | UNDERCUT CENTER FLANGE RIGHT BODY CORNER | | SQUARE CENTER FLANGE OUTSIDE LEFT CORNER | | SQUARE CENTER FLANGE OUTSIDE RIGHT CORNER | | SPECIAL FEATURES | LEFT END INSIDE DIA COUNTERSUNK 0.305 IN. DIA BY 90.0 DEG; RIGHT END INSIDE DIA COUNTERBORED 0.315 IN. DIA,0.100 IN. DEEP; OUTSIDE DIA OF FLANGE MILLED FLAT ON TWO SIDES TO 0.750 IN. WIDE; LOWER LEFT CORNER OF FLANGE NOTCHED 0.430 IN. BELOW HORIZONTAL CENTERLINE,0.220 IN. FROM VERTICAL CENTERLINE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 058R3 | | DESIGN CONTROL REFERENCE | SUM3597 |
|
|