|
|
|
National Stock Number:
3120-01-190-4146
Federal Supply Class:
3120
National Item Identification Number:
011904146
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 246973 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV |
|
Techincal Specification:
| DIAMETER | 0.3130 INCHES MINIMUM AND 0.3180 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-450 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 630 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.6100 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM | | OVERALL THICKNESS | 0.0320 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND |
|
|