5365-01-197-6668 SPACER,SLEEVE Index 5307-01-197-6670 STUD,SHOULDERED AND STEPPED

National Stock Number:
3120-01-197-6669

Federal Supply Class:
3120

National Item Identification Number:
011976669

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
71584899167HAMILTON SUNDSTRAND CORPORATION


Techincal Specification:
SURFACE FINISH16.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH32.0 MICROINCHES LEFT SIDE
SURFACE FINISH32.0 MICROINCHES LARGEST OUTSIDE DIAMETER
SURFACE FINISH32.0 MICROINCHES RIGHT SIDE
DIAMETER1.6270 INCHES MINIMUM AND 1.6280 INCHES MAXIMUM
CENTER HOLE KEYWAY DEPTH0.0193 INCHES NOMINAL
CENTER HOLE KEYWAY QUANTITY2
CENTER HOLE KEYWAY WIDTH0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM
CENTER HOLE SHAPE STYLEROUND W/KEYWAY
CORNER SHAPESQUARE ALL CORNERS
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
LUBRICATION FEATUREPERFORATION LARGEST OUTSIDE DIAMETER
MATERIAL DOCUMENT AND CLASSIFICATIONP-658 RC,FSCM 80894 MFR REF 1ST MATERIAL RESPONSE OVERALL OR US GRAPHITE GRAPHITAR,FSCM 79039 MFR REF 2ND MATERIAL RESPONSE OVERALL
MATERIALCARBON OVERALL OR GRAPHITE OVERALL
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE DIAMETER2.1288 INCHES MINIMUM AND 2.1293 INCHES MAXIMUM
OVERALL THICKNESS0.3390 INCHES MINIMUM AND 0.3410 INCHES MAXIMUM
STYLE DESIGNATORROUND


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us