3120-01-211-7524 BEARING,SLEEVE Index 3120-01-211-7526 BEARING,SLEEVE

National Stock Number:
3120-01-211-7525

Federal Supply Class:
3120

National Item Identification Number:
012117525

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
2012A3213002GOODRICH CORPORATION
2012A326K4C8GOODRICH CORPORATION
2012A326Z056CM MANUFACTURING INC


Techincal Specification:
BODY INSIDE DIAMETER1.0000 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.1260 INCHES MINIMUM AND 1.1265 INCHES MAXIMUM
CORNER SHAPESQUARE ALL CORNERS
FLANGE OUTSIDE DIAMETER1.2500 INCHES NOMINAL
FLANGE WIDTH0.0600 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-81820 MIL SPEC SINGLE MATERIAL RESPONSE INNER LAYER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/8,T6,T6510,T6511 FED SPEC 1ST MATERIAL RESPONSE OUTER LAYER OR QQ-A-225/8,T6,T6510,T6511 FED SPEC 2ND MATERIAL RESPONSE OUTER LAYER OR QQ-A-250/11,T6,T651 FED SPEC 2ND MATERIAL RESPONSE OUTER LAYER
MATERIALALUMINUM ALLOY 6062 OUTER LAYER OR ALUMINUM ALLOY 6061 OUTER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH0.4100 INCHES NOMINAL
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY0E 2 MIL SPEC SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENTANODIZE LEFT END SURFACE OF BODY AND FLANGE
SURFACE TREATMENTANODIZE OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE TREATMENTANODIZE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENTANODIZE RIGHT END SURFACE OF BODY
SURFACE TREATMENTANODIZE RIGHT END SURFACE OF LEFT FLANGE
TEST DATA DOCUMENT81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us