| BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.5520 INCHES MINIMUM AND 1.5720 INCHES MAXIMUM |
| FEATURES PROVIDED | EXTERNAL LUBRICATION FITTING |
| HARDNESS RATING | 57.0 ROCKWELL C MINIMUM AND 61.0 ROCKWELL C MAXIMUM INNER MEMBER |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY |
| INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| LUBRICATION FEATURE | GROOVE INNER MEMBER |
| OUTER MEMBER OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM |
| OVERALL LENGTH | 1.9525 INCHES NOMINAL |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 0.9688 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 26512-GB525AB MANUFACTURERS SPECIFICATION CONTROL |
| SPECIAL FEATURES | RACE INSERT,6TH AND 7TH MATERIAL RESPONSES PER QQ-B-637; PLATING ON EXTERNAL SURFACES OF RACE INSERT AND BODY ONLY; NO PLATING ON BORE OF BALL; OPTIONAL LUBRICANT RESERVOIR THRU SHANK LENGTH |
| STATIC RADIAL LOAD RATING | 4500 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RACE INSERT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| SURFACE TREATMENT | CADMIUM RACE INSERT |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIAMETER | 0.312 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNF |