| BORE DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 3.0300 INCHES NOMINAL |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM ROD END BODY |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| LUBRICATION FEATURE | SELF-LUBRICATING LINER RACE LINER |
| OVERALL LENGTH | 3.7800 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD 1ST MATERIAL RESPONSE AND AMS 5659 ASSN STD 2ND MATERIAL RESPONSE ROD END BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 440C INNER MEMBER |
| MATERIAL | STEEL COMP 630 OR STEEL COMP XM-12 ROD END BODY |
| OUTER MEMBER OUTSIDE DIAMETER | 1.5000 INCHES NOMINAL |
| OUTER MEMBER WIDTH | 0.5620 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM |
| SHANK END TO SHOULDER LENGTH | 1.4100 INCHES NOMINAL |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.0000 INCHES NOMINAL |
| SPECIAL FEATURES | PASSIVATION OF INNER MEMBER OPTIONAL; NO PAINT ON HOUSING BORE OR KNURLED AND THREADED PORTIONS OF BODY; OD OF ROD END BODY KNURLED OVER THREADS 0.875 IN. TO 1.000 IN. FROM ROD END |
| STATIC RADIAL LOAD RATING | 29000 POUNDS |
| STYLE DESIGNATOR | SHOULDERED BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| SURFACE TREATMENT | PASSIVATE INNER MEMBER |
| SURFACE TREATMENT | PLASTIC POLYURETHANE ROD END BODY |
| TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.6250 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 18 |