5340-01-225-2136 BRACKET,ANGLE Index 3120-01-225-2138 BUSHING,SLEEVE

National Stock Number:
3120-01-225-2137

Federal Supply Class:
3120

National Item Identification Number:
012252137

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
10396120A486GNIMIKKEISTOKESKUS NCB FINLAND
M81934/2-10A01481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY INSIDE DIAMETER0.6255 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.8137 INCHES MINIMUM AND 0.8147 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM
FLANGE WIDTH0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM
OVERALL LENGTH0.4995 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER
MATERIALALUMINUM ALLOY 2024 OUTER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
SPECIAL FEATURESLINER ON FLANGE FACE
SPECIFICATION/STANDARD DATA81349--81934/2 GOVERNMENT SPECIFICATION
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 OR TYPE 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 FED SPEC 2ND TREATMENT RESPONSE OUTER LAYER
SURFACE TREATMENTANODIZE OR CHROMATE OUTER LAYER


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us