|
|
|
National Stock Number:
3120-01-229-8264
Federal Supply Class:
3120
National Item Identification Number:
012298264
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 759-006-024 | 26055 | PARKER-HANNIFIN CORPORATION | | 759-006-024 | 59211 | PARKER-HANNIFIN CORPORATION | | B10469 | 77264 | PHOENIX SPECIALTY MFG CO INC |
|
Techincal Specification:
| DIAMETER | 0.0990 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.1900 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM | | OVERALL THICKNESS | 0.0100 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 16.0 MICROINCHES LEFT SIDE | | SURFACE FINISH | 16.0 MICROINCHES RIGHT SIDE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|