|
|
|
National Stock Number:
3120-01-267-6155
Federal Supply Class:
3120
National Item Identification Number:
012676155
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 9380051 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 0.7820 INCHES MINIMUM AND 0.8420 INCHES MAXIMUM | | HARDNESS RATING | 118.0 ROCKWELL R NOMINAL OVERALL | | OUTSIDE DIAMETER | 1.5000 INCHES NOMINAL | | OVERALL THICKNESS | 0.1250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-410,NATURAL FED SPEC SINGLE MATERIAL RESPONSE OR L-P-395,GLASS FIBER REINFORCED,TYPE 1,GRADE B FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL | | STYLE DESIGNATOR | ROUND |
|
|