3110-01-275-6870 SEAT,BEARING Index 5365-01-275-6872 SPACER,SLEEVE

National Stock Number:
3120-01-275-6871

Federal Supply Class:
3120

National Item Identification Number:
012756871

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.


Manufacturer Information:
3862152-799193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY1 HOLE
BODY INSIDE DIAMETER1.6000 INCHES MINIMUM AND 1.6200 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.7535 INCHES MINIMUM AND 1.7540 INCHES MAXIMUM
CORNER SHAPECHAMFERED INSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
HARDNESS RATING28.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL
HOLE DIAMETER0.1188 INCHES MINIMUM FIRST AND 0.1193 INCHES MAXIMUM FIRST
LEFT INTERNAL FLANGE HOLE DIAMETER1.4900 INCHES MINIMUM AND 1.5100 INCHES MAXIMUM
LEFT INTERNAL FLANGE WIDTH0.1200 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS 6415 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR MIL-T-6736 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR AMS 6360 ASSN STD 3RD MATERIAL RESPONSE OVERALL OR EMS 56627,CAGEC 99193 MFR REF 4TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL OVERALL
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH0.5300 INCHES MINIMUM AND 0.5400 INCHES MAXIMUM
SPECIAL FEATURESLUBRICATION HOLE LOCATED 0.400 IN. FROM RIGHT OUTSIDE CORNER TO CENTER
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES, INTERNAL FLANGE ONE END
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
TEST DATA DOCUMENT99193-EMS52308 CLASS 3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us