|
|
|
National Stock Number:
3120-01-296-0325
Federal Supply Class:
3120
National Item Identification Number:
012960325
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 23015740 | 73342 | ALLISON TRANSMISSION INC | | 6839278 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 1.7600 INCHES NOMINAL | | OUTSIDE DIAMETER | 2.6500 INCHES NOMINAL | | OVERALL THICKNESS | 0.0580 INCHES MINIMUM AND 0.0660 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYAMIDE (NYLON) OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, PINION THRUST | | SPECIAL FEATURES | MATERIAL POLYMIDE TMS 25150 GRAPHITE FILLED OR POLYMIDE IMIDE TMS 25152 | | STYLE DESIGNATOR | ROUND |
|
|