| BORE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.4170 INCHES MINIMUM AND 0.4570 INCHES MAXIMUM |
| LUBRICATION FEATURE | SELF-LUBRICATING LINER INSIDE DIAMETER SURFACE OF BODY |
| OVERALL LENGTH | 2.3245 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 440C INNER MEMBER |
| MATERIAL | STEEL COMP 630 RACE INSERT |
| MATERIAL | STEEL COMP E4340 ROD END BODY |
| OUTER MEMBER OUTSIDE DIAMETER | 1.0150 INCHES MINIMUM AND 1.0350 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.4110 INCHES MINIMUM AND 0.4210 INCHES MAXIMUM |
| SPECIAL FEATURES | BALL DIA RA 8.0 MICROIN MAX; BALL FACE AND OUTER RACE MEMBER DIA RA 32.0 MICROIN MAX |
| SHANK STYLE | INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 1.0000 INCHES MINIMUM |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.5520 INCHES MINIMUM AND 0.5640 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81349-MIL-B-81935/2D GOVERNMENT SPECIFICATION |
| STATIC RADIAL LOAD RATING | 8550 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | CADMIUM AND CHROMATE ROD END BODY |
| SURFACE TREATMENT | PASSIVATE INNER MEMBER |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.375 INCHES NOMINAL |
| THREAD DIRECTION | LEFT-HAND |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 24 |