| BORE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 2.1770 INCHES MINIMUM AND 2.1970 INCHES MAXIMUM |
| HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM ROD END BODY |
| HARDNESS RATING | 37.0 ROCKWELL C MINIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| OVERALL LENGTH | 2.6370 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASMS 5387 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL | COBALT COMP 6 INNER MEMBER |
| MATERIAL | STEEL COMP XM-12 ROD END BODY |
| OUTER MEMBER OUTSIDE DIAMETER | 0.8900 INCHES MINIMUM AND 0.9100 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3150 INCHES MINIMUM AND 0.3350 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.3600 INCHES NOMINAL |
| SPECIAL FEATURES | OUTER MEMBER I.D. SURFACE TO BE MALCOMIZED PER P11TF1 |
| SPECIFICATION/STANDARD DATA | 07482-1584-59 MANUFACTURERS SOURCE CONTROL |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-46010 MIL SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| SURFACE TREATMENT | LUBRICANT DRY FILM INNER MEMBER |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.3125 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 24 |