3120-01-336-0101, BEARING,SLEEVE

National Stock Number:
3120-01-336-0101

Federal Supply Class:
3120

National Item Identification Number:
013360101

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.

Manufacturer Information:

04A076-05C-005	76823	NORTHROP GRUMMAN SYSTEMS CORPORATION
04A076-05C005	1W025	NORTHROP GRUMMAN SYSTEMS CORP
07-282-05-005	09455	RBC TRANSPORT DYNAMICS CORP
AHJF05C(L1)005	15860	NEW HAMPSHIRE BALL BEARINGS INC
AHJF05C005	50294	NEW HAMPSHIRE BALL BEARINGS INC
KDJ05C005-342	97613	SARGENT AEROSPACE & DEFENSE, LLC
KRJ5UDSB-005S	50632	KAMATICS CORPORATION

Techincal Specification:

BODY INSIDE DIAMETER	0.3130 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.4381 INCHES MINIMUM AND 0.4386 INCHES MAXIMUM
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER	0.7920 INCHES MINIMUM AND 0.8120 INCHES MAXIMUM
FLANGE WIDTH	0.0625 INCHES NOMINAL
HARDNESS RATING	27.0 ROCKWELL C MINIMUM OUTER LAYER
OVERALL LENGTH	0.2188 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE OUTER LAYER
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE AND PLASTIC POLYAMIDE (NYLON) AND PLASTIC PHENOLIC OUTER LAYER
MATERIAL	STEEL COMP 630 INNER LAYER
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END

Click here to Register for Free 30-day Trial