|
|
|
National Stock Number:
3120-01-352-8509
Federal Supply Class:
3120
National Item Identification Number:
013528509
Description:
BEARING,PLAIN,SELF-ALIGNING
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The item consists of a bored precision ground ball (or spherical plain bearing) around which an outer ring is fitted. The assembly may be either separable or nonseparable. Excludes BEARING, PLAIN, ROD END and BEARING, PLAIN, SPHERICAL.
|
Manufacturer Information:
| 03-505-03 | 09455 | RBC TRANSPORT DYNAMICS CORP | | 04A066-03 | 09455 | RBC TRANSPORT DYNAMICS CORP | | 04A066-03 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | 04A066-03 | 16746 | RBC SPECLINE INC | | 04A066-03 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 04A066-03 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | AG3V-300CR | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | AG3VCR-300 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | BNG03E-066 | 16746 | RBC SPECLINE INC | | BHDN-3-2616 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | 04A066-03 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | 04A066-03 | 97613 | SARGENT AEROSPACE & DEFENSE, LLC | | KSB3-74 | 97613 | SARGENT AEROSPACE & DEFENSE, LLC |
|
Techincal Specification:
| BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OUTER RACE MEMBER | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER | | INNER MEMBER WIDTH | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER RACE MEMBER | | MATERIAL | STEEL COMP 440C INNER MEMBER | | MATERIAL | STEEL COMP 630 OUTER RACE MEMBER | | OUTER MEMBER OUTSIDE DIAMETER | 0.5620 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM | | OUTER MEMBER WIDTH | 0.2130 INCHES MINIMUM AND 0.2230 INCHES MAXIMUM | | STYLE DESIGNATOR | WITHOUT INSERT OR LINER WITH STAKING GROOVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER | | SURFACE TREATMENT | PASSIVATE INNER MEMBER |
|
|