|
|
|
National Stock Number:
3120-01-356-5127
Federal Supply Class:
3120
National Item Identification Number:
013565127
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 123-5766744 ITEM 74 | 53711 | NAVAL SEA SYSTEMS COMMAND | | EN DM101078 ITEM 74 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | CHAMFERED FIRST INSIDE CORNER | | CORNER SHAPE | CHAMFERED SECOND INSIDE CORNER | | CORNER SHAPE | ROUND FIRST OUTSIDE CORNER | | CORNER SHAPE | ROUND SECOND OUTSIDE CORNER | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 3.4870 INCHES NOMINAL | | OUTSIDE DIAMETER | 4.0000 INCHES NOMINAL | | OVERALL THICKNESS | 1.0000 INCHES NOMINAL | | MATERIAL | PLASTIC POLYETHYLENE OVERALL | | STYLE DESIGNATOR | ROUND | | SURFACE FINISH | 32.0 MICROINCHES LEFT SIDE | | SURFACE FINISH | 32.0 MICROINCHES RIGHT SIDE |
|
|