|
|
|
National Stock Number:
3120-01-480-5715
Federal Supply Class:
3120
National Item Identification Number:
014805715
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 122-2422338 PIECE 11 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2422338 PIECE 11 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 3.50 OD X 2.010 ID X .532 THK | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 2.0100 INCHES MINIMUM AND 2.0200 INCHES MAXIMUM | | OUTSIDE DIAMETER | 3.5000 INCHES NOMINAL | | OVERALL THICKNESS | 0.5320 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | ROUND |
|
|