| MATERIAL | STEEL COMP 440C AND |
| STEEL COMP XM-13 INNER MEMBER |
| STEEL COMP 630 RACE INSERT |
| PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| STEEL COMP 4340 ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD 1ST MATERIAL RESPONSE OR |
| AMS 5630 ASSN STD 1ST MATERIAL RESPONSE INNER MEMBER |
| MIL-S-5000 (4340) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT |
| MIL-S-500 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND |
| 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| 28.0 ROCKWELL C MINIMUM AND |
| 37.0 ROCKWELL C MAXIMUM OUTER RING |
| 39.0 ROCKWELL C MINIMUM AND |
| 42.0 ROCKWELL C MAXIMUM BODY |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-A-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| QQ-P-416,TYPE 2, CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE ROD END BODY |
| STYLE DESIGNATOR | BALL TYPE |
| OVERALL LENGTH | 2.5750 INCHES NOMINAL |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.7960 INCHES MINIMUM AND |
| 0.8160 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.4590 INCHES MINIMUM AND |
| 1.4790 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3320 INCHES MINIMUM AND |
| 0.3420 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.4350 INCHES MINIMUM AND |
| 0.4370 INCHES MAXIMUM |
| LUBRICATION FEATURE | SELF-LUBRICATING LINER RACE INSERT |
| SHANK STYLE | INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 0.7600 INCHES MINIMUM AND |
| 0.8750 INCHES MAXIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.3550 INCHES MINIMUM AND |
| 0.3950 INCHES MAXIMUM |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.5000 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD DIAMETER | 0.3125 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |