|
|
|
National Stock Number:
3120-01-500-6031
Federal Supply Class:
3120
National Item Identification Number:
015006031
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 2498-00-313 | 35795 | LESLIE CONTROLS, INC. | | 2498-00-313-5, SZ 12 | 35795 | LESLIE CONTROLS, INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 1.2650 INCHES MINIMUM AND 1.2800 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.6100 INCHES MINIMUM AND 1.6200 INCHES MAXIMUM | | OVERALL THICKNESS | 0.3240 INCHES MINIMUM AND 0.3260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A479 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 316 OVERALL | | STYLE DESIGNATOR | ROUND |
|
|