|
|
|
National Stock Number:
3120-01-502-9875
Federal Supply Class:
3120
National Item Identification Number:
015029875
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| M85069/06-08 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M85069/6P08 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-85069 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-85069/6A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 0.2480 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.2802 INCHES MINIMUM AND 0.2812 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | FLANGE OUTSIDE DIAMETER | 0.5000 INCHES NOMINAL | | FLANGE WIDTH | 0.0140 INCHES MINIMUM AND 0.0160 INCHES MAXIMUM | | OVERALL LENGTH | 0.9900 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | SPECIAL FEATURES | NOMINAL FASTENER SIZE=1/4 INCH;BUSHING BODY IS GROOVED BEGINING 0.188 INCHES BELOW FLANGE,GROOVES ARE ON 0.0625 INCH CENTER;THELAST 1/4 INCH OF BUSHING IS NOT GROOVED | | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2,EXTERIOR ONLY FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY | | SURFACE TREATMENT | CADMIUM OUTSIDE DIAMETER SURFACE OF BODY |
|
|