| ALIGNMENT TYPE | SELF-ALIGNING |
| ASSEMBLY OVERALL LENGTH | 2.0000 INCHES NOMINAL |
| BLOCK TYPE | FIXED |
| BOLT CIRCLE DIAMETER | 4.3750 INCHES NOMINAL |
| BORE DIAMETER | 1.5000 INCHES NOMINAL |
| COLLAR LOCATION | ONE END |
| FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| HOUSING LENGTH | 1.4688 INCHES NOMINAL |
| HOUSING DIAMETER | 5.2500 INCHES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| LUBRICATION FITTING TYPE | HYDRAULIC |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING |
| MATERIAL | IRON CAST HOUSING |
| MATERIAL | STEEL COLLAR |
| MATERIAL | STEEL COMP E52100 BEARING |
| MOUNTING HOLE DIAMETER | 0.4375 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| PILOT DIAMETER | 3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| PILOT LENGTH | 1.031 INCHES NOMINAL |
| ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| ROLLING ELEMENT GROOVE QUANTITY | 1 |
| SEAL LOCATION | BOTH ENDS |
| SEAL TYPE | LABYRINTH |
| SHAFT END TYPE | OPEN |
| STYLE DESIGNATOR | FLANGE CARTRIDGE BLOCK |