| BORE DIAMETER | 1.0000 INCHES MINIMUM AND |
| 1.0010 INCHES MAXIMUM |
| MATERIAL | STEEL COMP E52100 BEARING |
| IRON MALLEABLE HOUSING |
| RUBBER SYNTHETIC SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING |
| STYLE DESIGNATOR | PILLOW BLOCK, SOLID |
| BASE THICKNESS | 0.3438 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 3.7188 INCHES MINIMUM AND |
| 4.1562 INCHES MAXIMUM |
| HOUSING HEIGHT | 2.5625 INCHES NOMINAL |
| HOUSING WIDTH | 5.0000 INCHES NOMINAL |
| BASE LENGTH | 1.1250 INCHES NOMINAL |
| ASSEMBLY OVERALL LENGTH | 1.3125 INCHES NOMINAL |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.3125 INCHES NOMINAL |
| MOUNTING HOLE TYPE | SLOTTED |
| MOUNTING SLOT WIDTH | 0.3750 INCHES NOMINAL |
| MOUNTING SLOT LENGTH | 0.9688 INCHES NOMINAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION FITTING TYPE | HYDRAULIC |
| LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| ROLLING ELEMENT GROOVE QUANTITY | 1 |
| ALIGNMENT TYPE | SELF-ALIGNING |
| TEMP RATING | -25.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT |
| BLOCK TYPE | FIXED |
| SHAFT END TYPE | OPEN |
| SEAL TYPE | CONTACT |
| SEAL LOCATION | BOTH ENDS |
| ROTATING ELEMENT LOCKING METHOD | DIRECT |
| LOAD CAPABILITY TYPE | RADIAL AND |
| THRUST |
| FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |