| ALIGNMENT TYPE | RIGID |
| BASE THICKNESS | 0.375 INCHES NOMINAL |
| BLOCK TYPE | FIXED |
| BORE DIAMETER | 0.9995 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 4.499 INCHES MINIMUM AND 4.510 INCHES MAXIMUM |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.184 INCHES MINIMUM AND 1.190 INCHES MAXIMUM |
| HOUSING LENGTH | 6.000 INCHES NOMINAL |
| HOUSING WIDTH | 3.250 INCHES NOMINAL |
| HOUSING HEIGHT | 2.1875 INCHES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| LUBRICATION FITTING TYPE | WICK |
| MATERIAL | ALUMINUM ALLOY 6061 HOUSING |
| MATERIAL | STEEL CORROSION RESISTING SEAL |
| MOUNTING HOLE DIAMETER | 0.2187 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| ROLLING ELEMENT GROOVE QUANTITY | 2 |
| SEAL LOCATION | BOTH ENDS |
| SEAL TYPE | CONTACT |
| SHAFT END TYPE | OPEN |
| SPECIAL FEATURES | TWO BALL BUSHINGS INCLUDED |
| STYLE DESIGNATOR | PILLOW BLOCK, TWIN, ADJUSTABLE DIAMETER |