| ALIGNMENT TYPE | RIGID |
| BASE THICKNESS | 0.3125 INCHES NOMINAL |
| BLOCK TYPE | FIXED |
| BORE DIAMETER | 0.7495 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 3.4900 INCHES MINIMUM AND 3.5100 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 2.3650 INCHES MINIMUM AND 2.3850 INCHES MAXIMUM |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 0.9340 INCHES MINIMUM AND 0.9400 INCHES MAXIMUM |
| HOUSING LENGTH | 4.5000 INCHES NOMINAL |
| HOUSING WIDTH | 2.7500 INCHES NOMINAL |
| HOUSING HEIGHT | 1.7500 INCHES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| LUBRICATION FITTING TYPE | WICK |
| MATERIAL | ALUMINUM ALLOY 6061 HOUSING |
| MATERIAL | STEEL CORROSION RESISTING BEARING |
| MATERIAL | STEEL CORROSION RESISTING SEAL |
| MOUNTING HOLE DIAMETER | 0.1875 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| ROLLING ELEMENT GROOVE QUANTITY | 2 |
| ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| SEAL LOCATION | BOTH ENDS |
| SEAL TYPE | CONTACT |
| SHAFT END TYPE | OPEN |
| SURFACE TREATMENT | CHROMIUM BEARING |