| ALIGNMENT TYPE | SELF-ALIGNING |
| BASE LENGTH | 6.000 INCHES NOMINAL |
| BASE THICKNESS | 1.875 INCHES NOMINAL |
| BLOCK TYPE | FLOATING |
| BORE DIAMETER | 100.00 MILLIMETERS NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 2.375 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 11.625 INCHES MINIMUM AND 13.125 INCHES MAXIMUM |
| FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 4.500 INCHES NOMINAL |
| HOUSING LENGTH | 6.500 INCHES NOMINAL |
| HOUSING WIDTH | 15.250 INCHES NOMINAL |
| HOUSING HEIGHT | 8.8125 INCHES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| LUBRICATION FITTING TYPE | HYDRAULIC |
| LUBRICATION MATERIAL | GREASE AND OIL LUBRICATING |
| MATERIAL | IRON MALLEABLE HOUSING |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL BEARING |
| MOUNTING HOLE TYPE | SLOTTED |
| MOUNTING SLOT LENGTH | 1.500 INCHES NOMINAL |
| MOUNTING SLOT WIDTH | 0.750 INCHES NOMINAL |
| SPECIAL FEATURES | BOLT HOLES ON HOUSING DRILLED TO BOLT SIZE |
| ROLLING ELEMENT GROOVE QUANTITY | 2 |
| ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| SEAL LOCATION | BOTH ENDS |
| SEAL TYPE | LABYRINTH |
| SHAFT END TYPE | OPEN |
| STYLE DESIGNATOR | PILLOW BLOCK, OPTIONAL SPLIT |