|
|
|
National Stock Number:
3405-00-240-1647
Federal Supply Class:
3405
National Item Identification Number:
002401647
Description:
SAW,BAND,METAL CUTTING
Detail:
A VAIRABLE SPEED SAW, BASICALLY DESIGNED TO CUT AND/OR FILE METAL, USING A BAND SAW BLADE AND/OR A BAND FILE THAT IS REVOLVED OR ROTATED AROUND A DRIVER AND IDLER WHEEL(S). THE TEETH FORM A VERTICAL LINE WHILE PASSING THROUGH THE WORK. IT IS EQUIPPED WITH A FIXED OR TILTING HORIZONTAL TABLE FOR MOUNTING THE WORK. THE WORK TABLE AND/OR SAW FRAME MAY BE CAPABLE OF TILTING AS A UNIT TO PERMIT ANGLE CUTTING. IT MAY BE PROVIDED WITH SUFFICIENT CUTTING SPEEDS TO ALLOW FOR WOOD AND/OR OTHER MATERIAL CUTTING. EXCLUDES SAW (3), BAND, CUTOFF.
|
Manufacturer Information:
| 2012-2 | 18056 | DOALL BALTIMORE COMPANY | | MILS13908SIZE1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | ML | 18056 | DOALL BALTIMORE COMPANY |
|
Techincal Specification:
| DRIVE METHOD | ELECTRIC MOTOR | | ELECTRIC MOTOR QUANTITY | 1 | | ACCESSORY COMPONENTS AND QUANTITY | 3 BLADES,BAND FILE,FLAT,10 FT LG,JOINED,1/4IN.,3/8IN.AND 1/2IN.WIDE;26 BLADES,BAND,RAKER TOOTH,ALL BLADES ARE0.025IN. THK,15 ARE 10FT LG AND JOINEDAND ARE OF THE FOLLOWING DIMENSIONS,3/32IN. W 18PITCH,1/8IN. W 14PITCH,1/8IN. W 24PITCH,3/16IN. W 10PITCH,1/4IN. W 10PITCH,1/4IN. W 14PITCH,1/4 IN. W 24PITCH,5/16IN. W 18PITCH,5/16IN. W 24PITCH,3/8IN. W 10PITCH,3/8IN. W 14PITCH,3/8IN. W 24PITCH,1/2IN. W 10PITCH,1/2IN. W 14PITCH,1/2IN. W 18PITCH;11 BLADES COME IN 100FT DISPENSER ROLLS AND ARE OF THE FOLLOWING DIMENSIONS,3/32IN.W 18PITCH,1/8IN. W 14PITCH,1/8IN. W 24PITCH,3/16IN. W 10PITCH,1/4IN. W 10PITCH,1/4IN. W 14PITCH,1/4IN. W 24PITCH,5/16IN. W 18PITCH,5/16IN. W 24PITCH,3/8IN. W 10PITCH,3/8IN. W 14PITCH | | BAND TYPE FOR WHICH DESIGNED | SAW BLADE OR FILE | | BLADE MAXIMUM WIDTH ACCOMMODATED | 0.500 INCHES | | BRAKING FACILITY | NOT INCLUDED | | BUILT-IN COOLANT SYSTEM | NOT INCLUDED | | CURRENT TYPE | AC | | CUTTING SPEED RANGE | +50.0 TO 1500.0 FEET PER MINUTE | | DISTANCE BETWEEN GUIDE AND TABLE | 10.000 INCHES NOMINAL | | FILE MAXIMUM LENGTH ACCOMMODATED | 320.000 INCHES | | FILE MAXIMUM WIDTH ACCOMMODATED | 0.500 INCHES | | FEED METHOD | WORK INTO CUTTING BAND | | FRAME TYPE | RIGID | | FREQUENCY RATING | 60.0 HERTZ NOMINAL | | HORSEPOWER RATING | 0.250 | | INTEGRAL BUTT WELDER | INCLUDED | | INTEGRAL GRINDER | INCLUDED | | MOUNTING TYPE | FLOOR | | PHASE | SINGLE OR THREE | | POWER FEED FEATURE | PROVIDED | | ROTATIONAL SPEED RATING IN RPM | 1800.0 | | VOLTAGE RATING | 208.0 VOLTS NOMINAL | | TABLE LEFT TILT ANGLE IN DEG | 10.0 | | TABLE LENGTH | 24.000 INCHES NOMINAL | | TABLE RIGHT TILT ANGLE IN DEG | 45.0 | | TABLE TYPE | TILTING | | TABLE WIDTH | 24.000 INCHES NOMINAL | | THROAT DEPTH | 16.000 INCHES NOMINAL | | VISE | NOT PROVIDED |
|
|