|
|
|
National Stock Number:
3405-00-294-9591
Federal Supply Class:
3405
National Item Identification Number:
002949591
Description:
SAW,BAND,METAL CUTTING
Detail:
A VAIRABLE SPEED SAW, BASICALLY DESIGNED TO CUT AND/OR FILE METAL, USING A BAND SAW BLADE AND/OR A BAND FILE THAT IS REVOLVED OR ROTATED AROUND A DRIVER AND IDLER WHEEL(S). THE TEETH FORM A VERTICAL LINE WHILE PASSING THROUGH THE WORK. IT IS EQUIPPED WITH A FIXED OR TILTING HORIZONTAL TABLE FOR MOUNTING THE WORK. THE WORK TABLE AND/OR SAW FRAME MAY BE CAPABLE OF TILTING AS A UNIT TO PERMIT ANGLE CUTTING. IT MAY BE PROVIDED WITH SUFFICIENT CUTTING SPEEDS TO ALLOW FOR WOOD AND/OR OTHER MATERIAL CUTTING. EXCLUDES SAW (3), BAND, CUTOFF.
|
Manufacturer Information:
| 3405-2252-1512 | 99998 | DEFENSE SUPPLY CENTER RICHMOND INDUSTRIAL PLANT EQUIPMENT /DLA/ | | MIL-S-80201 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ACCESSORY COMPONENTS AND QUANTITY | ALUMINUM OXIDE ABRASIVE BAND,1 IN. W,12 EA,NO. 50,NO. 80,NO. 150; SAW BLADE GUIDE ADAPTER SET,90 DEG 1; DRIVE BELT SET 1; FLEXIBLE BACK CONVENTIONAL TOOTH SET,BAND SAW BLADE,RAKER SET,100 FT COILS PER GGG-B-421,TY 1,STYLE 1,8 COILS 0.025 IN. THK,W IN IN. AND TEETH AS FOLLOWS 1/8 14,1/8 18,1/8 24,1/4 10,1/4 18,1/4 24,1/2 6,1/2 10,2 COILS 0.032 IN. THK,3/4 10; SKIP TOOTH FLEXIBLE BACK BAND SAW BLADE,100 FT COILS PER GGG-B-421,TY 1,STYLE 2,2 COILS 0.025 IN. THK,W IN IN. AND TEETH AS FOLLOWS 1/4 6,1/2 4,1 COIL 0.032 IN. THK,3/4 3; 1 PUMP AND CHIP BLOWER,1 CIRCLE CUTTING ATTACHMENT; 1 CUT OFF-MITRE ATTACHMENT; MED CUT FLAT BASTARD FILE BANDS 1 EA 1/4 IN. W,1/2 IN. W; OVAL BASTARD FILE BAND MED CUT 1/4 IN. W BANDS 1 SET; FILE BAND GUIDES 1 SET EA FOR 1/4 IN. 1/2 IN. W BANDS; 1 SET ROLLER BACK-UP BEARING FOR 1/2,3/16,1/4,3/8,1/2,3/4 IN. W/BLADES; 1 HOLDING JAW; 1 SHIELDED TABLE LIGHT; 1 ETCHING PENCIL; 1 RIP FENCE | | SPECIAL FEATURES | ACCESSORY COMPONENTS AND QTY,FILE BAND GUIDES 1/4 IN. W,1 SET,FILE BAND GUIDES 1/2 IN. W,1 SET; BACK-UP ROLLER BEARING FOR 1/8,3/16,1/4,3/8,1/2,AND 3/4 IN. W BLADES,1 SET; JAW HOLDING 1; SHIELDED TABLE LIGHT 1; ETCHING PENCIL 1; RIP FENCE 1 | | NONDEFINITIVE SPEC/STD DATA | 16 SIZE | | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY VOLTAGE RATING | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-S-80201 | | DRIVE METHOD | ELECTRIC MOTOR | | HORSEPOWER RATING | 1.500 | | CURRENT TYPE | AC | | VOLTAGE RATING | 208.000 VOLTS NOMINAL | | FREQUENCY RATING | 60.000 HERTZ NOMINAL | | PHASE | THREE | | ELECTRIC MOTOR QUANTITY | 1 | | MOUNTING TYPE | FLOOR | | TABLE LENGTH | 24.000 INCHES NOMINAL | | TABLE WIDTH | 24.000 INCHES NOMINAL | | TABLE TYPE | TILTING | | TABLE RIGHT TILT ANGLE IN DEG | 45.0 | | TABLE LEFT TILT ANGLE IN DEG | 10.0 | | BAND TYPE FOR WHICH DESIGNED | FILE OR | | SAW BLADE | | FILE MAXIMUM WIDTH ACCOMMODATED | 0.500 INCHES | | BLADE MAXIMUM WIDTH ACCOMMODATED | 0.750 INCHES | | FRAME TYPE | RIGID | | VISE | NOT PROVIDED | | THROAT DEPTH | 15.250 INCHES NOMINAL | | DISTANCE BETWEEN GUIDE AND TABLE | 12.000 INCHES NOMINAL | | CUTTING SPEED RANGE | 50.0 TO 5200.0 FEET PER MINUTE | | INFINITE CUTTING SPEED FEATURE | PROVIDED | | POWER FEED FEATURE | PROVIDED | | FEED METHOD | WORK INTO CUTTING BAND | | BRAKING FACILITY | NOT INCLUDED | | BUILT-IN COOLANT SYSTEM | NOT INCLUDED | | INTEGRAL BUTT WELDER | INCLUDED | | INTEGRAL GRINDER | INCLUDED |
|
|