|
|
|
National Stock Number:
3405-00-351-9704
Federal Supply Class:
3405
National Item Identification Number:
003519704
Description:
SAW,BAND,METAL CUTTING
Detail:
A VAIRABLE SPEED SAW, BASICALLY DESIGNED TO CUT AND/OR FILE METAL, USING A BAND SAW BLADE AND/OR A BAND FILE THAT IS REVOLVED OR ROTATED AROUND A DRIVER AND IDLER WHEEL(S). THE TEETH FORM A VERTICAL LINE WHILE PASSING THROUGH THE WORK. IT IS EQUIPPED WITH A FIXED OR TILTING HORIZONTAL TABLE FOR MOUNTING THE WORK. THE WORK TABLE AND/OR SAW FRAME MAY BE CAPABLE OF TILTING AS A UNIT TO PERMIT ANGLE CUTTING. IT MAY BE PROVIDED WITH SUFFICIENT CUTTING SPEEDS TO ALLOW FOR WOOD AND/OR OTHER MATERIAL CUTTING. EXCLUDES SAW (3), BAND, CUTOFF.
|
Manufacturer Information:
| 3405-2252-3612 | 99998 | DEFENSE SUPPLY CENTER RICHMOND INDUSTRIAL PLANT EQUIPMENT /DLA/ | | 3613-1 | 14320 | CONTINENTAL MACHINES INC | | V36 | 18056 | DOALL BALTIMORE COMPANY | | A-A-59336 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MIL-S-80201SZ36 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILS13908 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRIVE METHOD | ELECTRIC MOTOR | | ELECTRIC MOTOR QUANTITY | 1 | | ACCESSORY COMPONENTS AND QUANTITY | ADAPTERS,SAW GUIDE,90 DEG ANGLE,1SET;BELTS,DRIVE,1 SET;CHIP BLOWER AND PUMP,1;CIRCLE CUTTING ATTACHMENT,1;CUT-OFF-MITRE ATTACHMENT,1;GUIDES,ABRASIVE BAND,FOR 1 IN.W BANDS,1 SET;GUIDES,FILE BAND,FOR 1/4 AND 1/2 IN W.BAND,1 SET;GUIDE,SAW BLADE,W/BALL BEARING BACK-UP ROLLER,1/8,3/16,1/4,3/8,1/2,3/4,AND 1 IN.W SAW BLADES,1 SET;JAW,WORKHOLDING,1;LIGHT,TABLE,SHIELDED,1;PENCIL,ETCHING,1;GRIP FENCE,1 | | BAND TYPE FOR WHICH DESIGNED | FILE OR SAW BLADE | | BLADE MAXIMUM WIDTH ACCOMMODATED | 1.000 INCHES | | BRAKING FACILITY | NOT INCLUDED | | BUILT-IN COOLANT SYSTEM | NOT INCLUDED | | CURRENT TYPE | AC | | CUTTING SPEED RANGE | +50.0 TO 4500.0 FEET PER MINUTE | | DISTANCE BETWEEN GUIDE AND TABLE | 12.000 INCHES NOMINAL | | FILE MAXIMUM WIDTH ACCOMMODATED | 0.500 INCHES | | FEED METHOD | WORK INTO CUTTING BAND | | FRAME TYPE | RIGID | | FREQUENCY RATING | 60.0 HERTZ NOMINAL | | HORSEPOWER RATING | 2.000 | | INFINITE CUTTING SPEED FEATURE | PROVIDED | | INTEGRAL BUTT WELDER | INCLUDED | | INTEGRAL GRINDER | INCLUDED | | MOUNTING TYPE | FLOOR | | NONDEFINITIVE SPEC/STD DATA | 3 CLASS AND 3 SIZE | | PHASE | THREE | | POWER FEED FEATURE | PROVIDED | | VOLTAGE RATING | 220.0 VOLTS MINIMUM AND 440.0 VOLTS MAXIMUM | | TABLE LEFT TILT ANGLE IN DEG | 5.0 | | TABLE LENGTH | 26.000 INCHES NOMINAL | | TABLE RIGHT TILT ANGLE IN DEG | 45.0 | | TABLE TYPE | TILTING | | TABLE WIDTH | 26.000 INCHES NOMINAL | | THROAT DEPTH | 36.000 INCHES NOMINAL | | VISE | NOT PROVIDED |
|
|